Public research preview · Independent publisher, not a government agency

Interactive tools need JavaScript to load. State guides and official-source links remain available.

State law reference

Idaho window tint laws

Research checked October 14, 2026 (UTC)Research and review standards
The short answer

Idaho distinguishes rear side windows from the rear windshield: the ordinary figures are 20% at the rear sides and 35% at the back window and front sides.

Read the official sources ↓

Rules by window

Read the rule for each window, then check the vehicle type and exceptions in that row. VLT means visible light transmission: a lower percentage means less light passes through. Reflectance measures light reflected back from a surface; it is different from VLT.
WindowRequirement
WindshieldNonreflective tint above the AS-1 line only; where no AS-1 line is identifiable, the statute provides a 6-inch top allowance.
Front sideAt least 35% transmission and no more than 35% reflectance, each with a 3-percentage-point tolerance.
Rear sideAt least 20% transmission and no more than 35% reflectance, each with a 3-percentage-point tolerance.
Rear windowAt least 35% transmission and no more than 35% reflectance, each with a 3-percentage-point tolerance.

Ordinary rules and factory equipment

The section calls for nonreflective material and separately provides a reflectance ceiling. Its ordinary aftermarket limits do not state a blanket SUV exemption. Federally lawful original or qualifying optional equipment has a separate protection.

Medical allowance

A driver or passenger with written verification from a licensed physician of a qualifying need to avoid sunlight or heat may use the specified medical allowance: 70% windshield and 20% other-window transmission, each with the stated 3-point tolerance, and the 35% reflectance ceiling. Carry the verification in the vehicle.

Avoid using tolerance as the target

Choose an installation intended to meet the stated limits before any testing tolerance is considered. The statute regulates both installation and driving. A film label alone does not prove that a particular vehicle complies.

Before you rely on this guide

This is general information, not legal advice, a vehicle inspection, or permission to install a particular film. Exceptions and enforcement procedures can depend on your circumstances.

  • The definition here refers to the product or material rather than expressly saying combined glass and film. A separate official enforcement explanation resolving that measurement wording was not located; verify the installed result before purchase.

The research date shows when the sources were checked. It is not the date the law took effect, and it does not mean this page is monitored continuously. This research preview still awaits human editorial review; we do not claim attorney review.

Official sources

  1. Idaho Code 49-944 ↗

    Official Legislature section, with amendment history through 2023; supports window-specific limits, tolerances, medical verification, and original-equipment provision.