Ontario passenger-car window tint: road use and safety inspection
Ontario passenger-car tint guidance: road-use visibility rules, manufacture-date distinctions and safety-inspection criteria, with official sources.
Read the Ontario guide →Canada · Passenger-car reading guides
Canadian passenger-car tint guides
Choose one of the four provinces below. Read the full guide for the windows and vehicles it covers, the official sources and the date they were checked. The British Columbia guide covers the windshield and front side windows only.
Québec passenger-car window tint: measure the finished window
Québec requires the front side windows to transmit at least 70% of light when tested with a photometer. That means checking the finished window, including its existing tint and any added film. The SAAQ's tinted-window guidance warns that original glass already reduces light transmission and that owners remain responsible for tint on a used vehicle.
Read the Québec guide →Alberta passenger-car window tint: added film and original glazing
Alberta's official tint guidance says tinting material cannot be attached to the windshield or the windows to the driver's left and right without an approved exemption. A lighter film is not automatically acceptable merely because it transmits a high percentage of light.
Read the Alberta guide →British Columbia: windshield and front-side window tint
A front-glazing-only guide for ordinary passenger cars, covering added film, manufactured-in tint and inspection criteria. Rear-window tint is outside this guide.
Read the British Columbia guide →Scope and source dates
Each guide links to the official sources behind its explanation. Source-review dates record a check, not a law’s effective date or continuous monitoring. Read the source dates and exclusions on the guide you choose.
General education, not legal advice, an inspection certificate or permission for a particular installation. The U.S. comparison and tint planner do not determine Canadian requirements.